For a 4 ft × 8 ft drywall sheet in Jamaica, published online prices accessed on 28 October 2026 range from J$1,754.99 to J$2,999.99. Before you compare totals, settle the board type, thickness, sheet size and whether GCT is included. A 12 ft × 12 ft room with 8 ft walls needs about 14 sheets for the walls only, or about 19 sheets for the walls and ceiling when 10% waste is allowed.
Your final budget also needs studs or track, screws, tape, joint compound, corner bead, labour, transport and finishing. Use the measurements below to prepare the same materials list for each hardware branch or installer, and see how to get a hardware store quote for building materials in Jamaica for asking in writing.
Published prices for one 4 ft × 8 ft sheet
The prices below are individual online listings, not an island-wide average. Product type matters. A water-resistant board, regular gypsum board and a branded Sheetrock product may not be the same item, even when the dimensions are similar.
The Panel Rey water-resistant listing carries the lowest displayed sale price, J$1,754.99, while its comparison price is J$2,999.99. You can view the Total Hardware water-resistant drywall listing before asking the branch to confirm the current price, dimensions and stock.
The other regular or standard examples include Cesco’s JMD 2,294.00 listing for 1/2 inch Sheetrock, K-BAN’s JMD 2,347.65 listing for 1/2 inch drywall, and Greenwood Plaza’s J$2,895.00 regular 1/2 inch sheet. For the 12 mm regular gypsum board on the Hardware & Lumber listing, ask the branch for the price in Jamaican dollars and whether GCT is included.
Treat each displayed amount as the store’s published price for that product as of October 2026. Ask for the current JMD total, the exact thickness, the price per sheet or pack, and GCT inclusion before you send payment or arrange transport.
For a ceiling, fire-rated partition or 4 ft × 12 ft layout, ask the branch to quote the exact board required. Do not assume that a 1/2 inch regular sheet has the same performance as a fire-rated or moisture-resistant assembly.
The other materials in a framed drywall job
A sheet price is only one part of the shopping list. A framed wall or ceiling may require metal studs, metal track, drywall screws, joint tape, joint compound, corner bead, framing fasteners, insulation where specified, sanding tools and finishing tools.

Greenwood Plaza publishes these accessory prices:
The Finish Teck 19 L listing is marked sold out, so ask the branch for the current pack and available alternative. The Greenwood Plaza drywall accessories prices also give you a starting point for comparing studs, track and compound.
Where the frame is timber instead of metal, compare lumber, plywood and sand prices in Jamaica on the same written basis.
Other published accessory examples include Cesco Easy Finish joint compound at JMD 5,140.00 for 5 gallons, Graham’s Hardware DAP joint compound at J$2,800.00 for 1 gallon, and Graham’s Easy Finish joint compound at J$7,200.00 for 5 gallons. Graham’s also publishes paper drywall joint tape at J$1,400.00 for 2 inches × 250 ft, fiberglass drywall tape at J$1,500.00 for 300 ft, PVC corner bead at J$600.00 for 1-1/4 inch × 8 ft and galvanized corner bead at J$800.00 for 1-1/4 inch × 8 ft. See Graham’s drywall accessory listings when preparing a tape and finishing list. Once the joints are sanded, see paint prices in Jamaica for the finishing coat.
K-BAN publishes Sure corner tape at JMD 3,020.00 and plastic drywall corner bead at JMD 860.70. The product description and pack details should be confirmed with the branch. Its construction-material listings are available under K-BAN drywall and construction materials.
Screw quantities depend on the framing layout, board orientation, number of layers and the fastening schedule for the selected product. Ask for a written materials quote that identifies the item, pack size, quantity, currency, GCT and branch.
How to calculate the number of sheets
Start with the measurements, not the price. Write down the length and height of every wall, the room width, doors and windows, the ceiling area and whether each partition has board on one side or both.

For a rectangular room:
wall area = 2 × (length + width) × wall height
If the ceiling will be boarded:
ceiling area = length × width
A 4 ft × 8 ft sheet covers 32 square feet. A 4 ft × 12 ft sheet covers 48 square feet. Divide the required board area by the coverage of the selected sheet and round up to a whole sheet.
The CertainTeed installation instructions use the full wall and ceiling areas divided by the area of one board. That approach allows for cutting openings out of full sheets. You can also deduct measured door and window areas, then add a waste allowance. The CertainTeed installation instructions set out the full-area method.
A practical estimating formula is:
Sheets = ceiling[(wall area + ceiling area - opening area) × (1 + waste allowance) ÷ sheet area]
Use a separate calculation for each side of a partition. If a room divider is boarded on both sides, the board area for that divider is counted twice. Cutting waste, damaged boards, ceiling layout and sheet orientation can change the final number.
A calculator can help with the arithmetic, but it cannot choose the correct board type or decide what a building approval requires. The drywall calculator from Tallyard is one way to check your figures.
What board type should you price?
Regular gypsum board is commonly used for interior wall and ceiling work. Moisture-resistant board may suit areas exposed to humidity or occasional moisture. It is not a substitute for waterproofing in a continuously wet area. If the wall will be tiled, see tile prices in Jamaica.
The Jamaica Building Code describes gypsum board as a group of sheet products with a mainly gypsum, noncombustible core and paper surfacing. The group includes gypsum wallboard, gypsum sheathing, gypsum base, exterior gypsum soffit board, predecorated gypsum board and water-resistant gypsum backing board. The Jamaica Building Code material on gypsum board gives the product categories.
The Jamaica Residential Code identifies 12.5 mm, or 1/2 inch, gypsum board as one approved material for draftstopping when adequately supported. That does not mean every 1/2 inch board automatically gives a particular fire rating. The required assembly, supports, joints, penetrations and product certification all matter. The Jamaica Residential Code document should be considered with the proposed work.
For a fire separation, ceiling, bathroom area or other specialised application, give the installer or building professional the exact product label and ask what assembly is required. You can also ask the relevant municipal building authority about approval requirements for the project.
Labour and the scope of the quote
Price labour from the same measured scope each time. A drywall job may include framing, board installation, cutting around openings, taping, joint compound, sanding, corner bead, ceiling work, transport and disposal. General construction labour is not a substitute for a drywall installation quote because the tasks may be different.

Ask each installer to separate framing, board installation, and whether the price covers one side or both sides of a partition. Ask them to separate insulation, screws and other fasteners, and the tape, compound and corner bead.
Sanding and finishing, ceiling work, and transport and disposal should each be shown on their own line too. Ask whether the labour is priced per sheet, square foot, day or complete job.
For labour, request at least two written local quotes using the same room measurements, board type, sheet quantity and finish. If the job also includes block work, compare cement prices in Jamaica the same way.
How GCT changes the comparison
Jamaica’s standard General Consumption Tax rate is 15% for taxable goods and services. The Ministry of Finance revenue measures and Jamaica Customs Agency describe zero-rated goods as attracting 0% GCT, while exempt goods receive a statutory relief from GCT.

For an ordinary drywall sheet or accessory, ask the seller to state the GCT treatment for the particular transaction. The Jamaica Customs duties and taxes information explains the wider tax terms.
The Fair Trading Commission says the GCT Act does not require every retail price to be displayed in one particular way. Some retailers quote prices inclusive of GCT and others quote prices before GCT. Read the quote line by line and record the pre-GCT amount, if shown, the GCT amount and the total payable. Also record the currency, the exact product and quantity, and the branch and date.
The Fair Trading Commission shopping guidance is useful when comparing displayed prices and receipts.
Questions to put to the hardware branch
Have your measurements ready before you call or visit. Ask whether the branch has the exact 4 ft × 8 ft sheet in stock, whether it is regular, water-resistant, moisture-resistant or fire-rated, and whether the thickness is 12 mm or 1/2 inch. Ask whether the price is per sheet or per pack, whether the displayed price is current and whether it includes GCT.
Ask for the total for 20, 30 or 50 sheets, and whether the quoted price remains valid for the quantity required. Ask whether the branch has matching studs and track and what lengths are available, and which drywall screws, tape, joint compound and corner bead suit this board.
Finally, ask about the delivery charge and delivery area, when the order can be collected, the process for a damaged sheet and which payment methods are accepted.
A small builder or relative abroad should request the full quote in writing, including the branch, product description, sheet dimensions, thickness, quantity, GCT, transport and payment instructions. If someone else will collect, give them the written product description so a similar-looking board is not substituted without approval.
Common questions
How much is one 4x8 sheet of drywall in Jamaica?
Published online examples accessed on 28 October 2026 range from J$1,754.99 to J$2,999.99. The lower amount is a displayed sale price for a water-resistant Panel Rey sheet, while regular 1/2 inch examples range from JMD 2,294.00 to J$2,895.00. Ask for the current total with GCT and the exact board type before buying.
How much do 20, 30 or 50 sheets of drywall cost?
Using the published per-sheet prices, sheet-only totals are:
These totals exclude framing, accessories, labour, transport, discounts and any applicable GCT. Ask whether the branch will prepare a project quote for the quantity you need.
How much drywall do I need for a 12x12 room?
With 8 ft walls and a 4 ft × 8 ft sheet, the four walls total 384 square feet. That requires 12 sheets before waste, or 14 sheets with a 10% waste allowance.
The 12 ft × 12 ft ceiling adds 144 square feet. Walls and ceiling total 528 square feet, which requires 17 sheets before waste or 19 sheets with 10% waste. These figures count full wall and ceiling areas, so confirm the final layout with the installer.
What is the difference between sheet rock and drywall?
“Sheetrock” is a brand name commonly used as a general term. “Drywall” is the wider construction term, while “gypsum board” describes a gypsum-based panel with facing material.
Regular, moisture-resistant, fire-rated and ceiling products can differ in performance. Give the branch the intended use, thickness and dimensions, then compare the product label rather than the name alone.
How much is labour to install drywall in Jamaica?
The labour amount depends on the scope, including framing, one or both sides of a partition, ceiling work, openings, insulation, taping, compound, sanding, corner bead, transport and disposal. Ask installers for written quotes using the same measurements and materials list, with labour separated from materials, transport and GCT.
How many sheets of drywall does a 1,000 sq ft house need?
A 1,000 sq ft floor area is not enough to calculate the whole-house sheet count because the walls, room layout, ceiling height, openings and partitions also matter. If 1,000 sq ft refers to a ceiling only, 32 sheets cover the area before waste, or 35 sheets with 10% waste, using 4 ft × 8 ft sheets.
For the full house, calculate each room’s wall area, add ceilings and partition surfaces, then divide by 32 square feet per sheet and round up. Add a waste allowance suited to the layout.
For the branch closest to your project, use the hardware stores directory and contact the shop to price the exact board, accessories and delivery.

